Once Windows has been clean installed you must then install first the chipset drivers, then the storage/SATA drivers and third the graphics drivers, the drivers can either come from a disk provided by the motherboard manufacturer or downloaded from the site and saved to a flash drive etc, this is a must and Windows should not be allowed to check for updates before it has been done as more often than not Windows installs the wrong drivers or in the incorrect order and this can cause all sorts of problems.Most of the RAM types we get these days are, or have, DDR (Double Data Rate). Once Windows had been installed did you then install the chipset drivers for the MB, why this is important is explained below

Onboard graphics is poor when it comes to gaming and especially when only 512MB of memory is available, this causes overheating and the PC running out of resources when you try playing games that the PC does not meet the minimum specs. SE2717H/HX ATI AMD Radeon Graphics (Gigabyte) You need to disable XMP in the BIOS and then manually set the RAM to run at 3200MHz. The RAM is being overclocked past what the CPU can handle which as stated by AMD here is 3200MHz. Thanks to anyone for your help, if there is any additional info required please let me knowġ6.0GB Dual-Channel Unknown 1796MHz (18-22-22-42) Western Digital WD Blue SN550 NVMe M.2 2280 500GB PCI-Express 3.0 x4 3D NAND Internal Solid State DriveĮVGA 650 BQ 110-BQ-0650-V1 80+ BRONZE 650W

Team T-FORCE DARK Za 16GB 288-Pin DDR4 SDRAM DDR4 3600 GIGABYTE B550M DS3H AM4 AMD B550 Micro-ATX Motherboard I built the PC according to the video linked here (youtube PC build guide) I do not believe it is a cooling issue as the fan that came with the Ryzen is stated to have thermal paste pre-applied and none of the PC’s components are hot or warm to the touch. After I restore power everything returns to normal with the computer starting up without any indication of error (no notification to start in safe mode or the like). The only way to get the PC operational again is to unplug it or turn off the power supply. Pushing the power button (both long and short push) does not cause anything to happen. However, the case fans, the power supply fan, and the cooling fan all keep operating in this state, as well as the light indicating the PC is on. Seemingly at random the PC will lose its display and stop providing power to the mouse and keyboard, which are connected by USB. Hello, I recently (1 week ago exactly) built a PC for personal and gaming use (specs listed below).

Speccy ram type ddr4 unknown